最新成果


開坑大會
2023-10-04

由各坑團長介紹他們要製作的遊戲並招募坑團成員。

社群招生及社課體驗
2023-10-03

向新進的社群人員介紹社群的起源以、成立的宗旨、學期規劃,互相交流認識,介紹一下機台的種類,教導機台操作辦法。

聯合招募大會
2023-10-02

為了讓校內同學更深入了解校內的資訊社群,我們UDC扮演了發起者的角色,共同邀請了「GDSC」、「創遊社」、「區塊鏈社」和「中央競程社」一起舉辦資訊社群聯合招募大會。

透過有計畫的行銷策略,我們成功吸引了近百名同學參加這次活動。更令人振奮的是,活動結束後,許多同學與各社群的領導者進行了深入的討論,這可以視為中央大學資訊社群的一個重大突破。

給新手遊戲開發者的攻略指南
2023-09-27

邀請資深遊戲業者水狼陽介來講解。

PID Control System and AI Adaptation
2023-09-25

Abstract — In this project, a feedback system is composed of a motor, AS5600 decoder, ESP32 microcontroller, and L298N H-bridge motor driver. This integrated setup is utilized for angle control of the motor using a PID algorithm. Besides rotating the motor shaft to a specific angle, by adjusting the PID parameters and algorithm, it becomes possible to simulate different rotational sensations, such as those resembling gears or damping effects.
In addition to optimizing through manual PID parameter adjustments, the Proximal Policy Optimization (PPO) technique from the field of Reinforcement Learning is also employed to tune the PID parameters.
Conclusion—Based on the structure of a brushed DC motor, instability in control occurs within the intervals of commutator switching. To address this, a subsequent improvement involves transitioning to the use of a brushless motor.
During the implementation process, it was observed that the ESP32's response speed was approximately 1ms, which appears to be lower in comparison to other motor control systems.
Whether this issue stems from hardware or software requires further discussion and subsequent investigation. Manual parameter adjustment is viable but time-consuming and labor-intensive, demanding a high level of skill from operators. As for the AI aspect, its viability remains pending the outcome of future experiments.

3D printing equiment update
2023-09-22

update the equipment, and do some 3D printing for testing.

期初大會
2023-09-22

成功完成社群的期初大會,認識許多志同道合的同學,現場與不同的同學展開各專案方面的討論,與預期的進行方式相同。

坑團長經驗分享
2023-09-20

今天我們請經驗豐富的學長姐來做經驗分享
他們分別是Cobra、冠佑、桑雅、小周,不僅告訴我們做遊戲的快樂,也告訴我們做遊戲的辛酸血淚。

創遊期初大會
2023-09-13

創遊期初大會

NCU插畫調色盤課程No.9
2023-07-31

這學期的「NCU插畫調色盤社群」壓克力顏料彩繪,多元藝術課程設計「舊物再造華麗轉身」,「創意手繪環保杯袋」,「創作作品結合愛心公益募款活動」。

NCU插畫課調色盤社課 No.7
2023-07-31

學校有很好的設備、資源,很棒的教室、課程設計,很可惜沒能找到下一屆願意傳承的社長,原來「社長」只有少數人想當(擔),真的需要具備「渴望」和「熱情」特質的人。(欸我有嗎?呵呵😄),請不吝給願意擔任社群幹部的同學們多點掌聲鼓勵👏👏👏。
分享一句「蘇媽」說的話:永遠不要害怕承擔風險,有不少工作是在巨大壓力下完成的,這也是激發出一個人最好的一面。
#感謝國立中央大學教育研究中心
#謝謝參與社群課的每一位同學們
#用自己的方式對社會盡一份心力

密碼櫃架設(二)
2023-07-21

測試密碼櫃是否能正常使用